mm electrical logo

M.M. ELECTRICALS & ELECTRONICS

ECD 210 intelligent modem

Product at a glance

Smart and reliable AMR

ECD 210 is an intelligent modem for data transfer between an electronic energy meter and a central station over the GSM/GPRS communication network. Working in conjunction with base computer software (BCS) it provides a cost-effective solution for automatic meter reading (AMR). The modem can be programmed to automatically transmit SMS messages to the central station when certain metering events are detected. This extends the role of ECD 210 beyond traditional remote meter reading and into the realm of system integrity monitoring and surveillance.

Application

  • GSM/GPRS-based remote meter reading (RMR) systems
  • Outstation modem, connected at the meter end
  • HV or LV metering installations

Benefits

  • Maximum operational flexibility: it can be used with any type of electronic meter
  • Increased productivity through collection of data via AMR
  • Minimal installation cost
  • Reduced logistical costs: ECD 210 works on single-phase or three-phase supplies
  • Notification of metering events through automatic SMS messages

Features

  • GSM/GPRS modem with built-in three phase power supply
  • Scheduled meter reading & data storage capability
  • Automatic sms messaging for metering events or alarms
  • Meter connectivity through:
    • Optical communication port
    • Serial RS-232/RS-485 communication port
  • Status LEDs
  • SIM card provision
  • Engineering plastic enclosure
  • Sealing provision for security
  • Wall mounting facility
Specification
Electrical
Power supply input 3 x 240 V AC, 50 Hz
Power supply range 50 to 540 V AC
Surge withstand capacity 6 kV as per IEC 61000-4-5
Isolation safety 4 kV AC, 1 minute
Power supply cable Integral lead
Antenna Wired antenna (5 dBi) with magnetic base
Compliance
Operating frequency Dual band EGSM/GPRS 900/GSM1800 MHz
ETSI GSM Phase 2+ standard Class 4: 2W @ 900 MHZ
Class 1: 1W @1800 MHZ
GPRS multi-slot class Class 10
Mechanical
Dimensions (W x H x D) 131 x 222 x 40 mm (approx.)
Weight 0.4 kg (approx.)
Sealing Two sealable terminals on the cover
Connections SMA for antenna connection
9-pin D-sub (female) for connection to meter (RS-232 or RS-485 port on modem)depending on variant
SIM card* Externally accessible
Sliding tray type (with sealing arrangement)
3 V interface
Battery For modem working in absence of mains supply, available in selected variants
Environmental
Ingress protection IP55
Temperature -10 C to +55 C (operating)
Humidity 95% non-condensing
ECD 210 intelligent modem

ECD 210 intelligent modem

CALL FOR PRICE

Product at a glance

Smart and reliable AMR

ECD 210 is an intelligent modem for data transfer between an electronic energy meter and a central station over the GSM/GPRS communication network. Working in conjunction with base computer software (BCS) it provides a cost-effective solution for automatic meter reading (AMR). The modem can be programmed to automatically transmit SMS messages to the central station when certain metering events are detected. This extends the role of ECD 210 beyond traditional remote meter reading and into the realm of system integrity monitoring and surveillance.

Application

  • GSM/GPRS-based remote meter reading (RMR) systems
  • Outstation modem, connected at the meter end
  • HV or LV metering installations

Benefits

  • Maximum operational flexibility: it can be used with any type of electronic meter
  • Increased productivity through collection of data via AMR
  • Minimal installation cost
  • Reduced logistical costs: ECD 210 works on single-phase or three-phase supplies
  • Notification of metering events through automatic SMS messages

Features

  • GSM/GPRS modem with built-in three phase power supply
  • Scheduled meter reading & data storage capability
  • Automatic sms messaging for metering events or alarms
  • Meter connectivity through:
    • Optical communication port
    • Serial RS-232/RS-485 communication port
  • Status LEDs
  • SIM card provision
  • Engineering plastic enclosure
  • Sealing provision for security
  • Wall mounting facility
Specification
Electrical
Power supply input 3 x 240 V AC, 50 Hz
Power supply range 50 to 540 V AC
Surge withstand capacity 6 kV as per IEC 61000-4-5
Isolation safety 4 kV AC, 1 minute
Power supply cable Integral lead
Antenna Wired antenna (5 dBi) with magnetic base
Compliance
Operating frequency Dual band EGSM/GPRS 900/GSM1800 MHz
ETSI GSM Phase 2+ standard Class 4: 2W @ 900 MHZ
Class 1: 1W @1800 MHZ
GPRS multi-slot class Class 10
Mechanical
Dimensions (W x H x D) 131 x 222 x 40 mm (approx.)
Weight 0.4 kg (approx.)
Sealing Two sealable terminals on the cover
Connections SMA for antenna connection
9-pin D-sub (female) for connection to meter (RS-232 or RS-485 port on modem)depending on variant
SIM card* Externally accessible
Sliding tray type (with sealing arrangement)
3 V interface
Battery For modem working in absence of mains supply, available in selected variants
Environmental
Ingress protection IP55
Temperature -10 C to +55 C (operating)
Humidity 95% non-condensing
ECD 210 intelligent modem